Seat upgrades

Swap the stock seat for a more comfortable Corbin-Pacific or Tapia's seat.

system: body & frame
difficulty
time: not yet known
trust: community-reported
verified: not yet help verify it

safety

Make sure both seat bolts are tight before riding. A loose seat can shift under you.

01Tools you’ll needall tools →

5 mm Allen key5 mm hex (Allen) key or bit (seat bolts)details: 5 mm Allen key

02Parts

SeatunverifiedCorbin-Pacific Tapia's Seats

03Steps

The stock seat is a common complaint. Two makers offer more comfortable seats: Corbin-Pacific and Tapia’s Seats (custom). Owners report Tapia’s installs much like the Corbin.

step 01

Remove the stock seat: undo the two M6 × 1.00 × 25 bolts with a 5 mm Allen key, then pull up on the front while sliding the seat forward.

step 02

Fit the new seat. Corbin’s installation is shown step by step in this owner video. TODO: written steps for each seat aren’t documented yet. Share yours with photos.

step 03

Refit and tighten the bolts. TODO: seat bolt torque isn’t documented.

Tick steps as you go. Ticks stay on this device only.